Serie SUNOR 3
The SUNOR 3 Series is the most advanced range of fibre laser tube cutting machines: it combines high power (up to 20 kW) with loading and unloading capacities of up to 20 metres.
Designed for heavy industry, it offers zero scrap, consistent precision and the flexibility to work with large, heavy tubes and profiles.
Its system of three high-speed pneumatic clamping plates ensures fast and secure clamping, optimising material utilisation.
It also features a BOCI 2.5D bevel head, which allows angular cuts of up to 45°, ideal for complex structures and precision welded joints.
Maximum robustness and productivity, with the reliability of top-quality components and performance designed for large-scale, continuous production.
Ideal for structural fabrication, metalworking and large-section profile manufacturers, where maximum power, advanced automation and cutting precision are required.
Characteristics
01. Manual loading system
High-capacity manual loading system, designed for tubes between 6 and 20 meters in length. This equipment has been specifically developed to meet the demands of heavy industry, guaranteeing robustness, precision, and reliability in every operation.
Its reinforced structure allows handling of large and thick materials, maintaining excellent stability during the cutting process.
Thanks to its high-power laser technology, it offers clean and precise cuts even in high-production-demand applications.
02. Unloading system with stacker
The front discharge system includes pneumatic support brackets, which hold the tube so that it does not sag while making long cuts.
Once the workpiece is cut, all the raised supports retract and the workpiece slides into storage. The support action is automatically controlled by the control unit.
The unloading system has an area for short pieces and an area for long pieces with a stacker using belts.
03. Machine structure
The machine features a double-column gantry-type steel frame, manufactured from structural tubes and high-strength plates, which is welded and heat-treated to eliminate internal stresses and ensure dimensional stability. The base is machined in-house using large gantry milling machines, achieving high precision on the support surfaces for the guide rails and rack. The result is a rigid, stable structure that is impact- and corrosion-resistant, with optimised weight and increased processing speed.
04. 3-plate clamping system
The machine features a cutting control system based on three full-travel turntables, which ensures a
firm and stable clamping of the tube throughout the entire process. This system significantly improves machining accuracy and
prevents unwanted movement or vibration of the material.
The machine enables bevelled cuts to be made on tubes based on designs generated by nesting software.
In this way, the machining of bevelled parts is carried out automatically and precisely, facilitating
subsequent assembly or welding operations.
05. 3 centering plates
3 high-speed pneumatic centering plates.
Minimal scrap of zero.
Ensures high cutting accuracy.
Features a fast clamping process and adjustable clamping force.
Maximum material utilization.
The main and rear sections are interchangeable.
06. Support Tracking System
Equipped with a high-sensitivity independent servo tracking system to ensure cutting stability and improve accuracy.
07. Air cleaner
Our dust extraction systems are designed to maintain clean and safe work environments. The filters quickly and effectively remove all types of debris, fine particles, and harmful fumes generated during cutting.
The chassis is made of carbon steel and equipped with:
Dust container, waste bin, suction cartridges, blow-out unit for cleaning the cartridges, spark-proof device.
Optional SEMI-AUTOMATIC LOADING AND UNLOADING
They can carry
4+1 tubes
Different types of tubes can be loaded at the same time
in the order they appear in the parts list.
Minimum tube length
6000 mm
Maximum tube length
20000 mm
Maximum weight
From 1100 kg to 9000 kg depending on the model
Reinforced system
For heavier loads and a minimum tube length of up to 3000 mm
Open-type tubes can be loaded
(L, U, T, H)
Double safety barrier
Allows the semi-automatic loader to be fed while the machine is working
Technical data
Different input and output sizes.
Our tube cutting machine offers exceptional operational versatility, with an input range of 3 to 20 meters and an adjustable output of 0 to 12 or 20 meters, depending on the process requirements. Designed to adapt to both manual and semi-automatic modes, it guarantees precision and efficiency with every cut.
Different chucks diameters
Available in 240, 350 mm, 450 mm, 500 mm y 550 mm.
2.5D Laser Cutting Head
First brand of 2.5D printheads (BOCI).
It allows obtaining angular surfaces and welded joints with great precision and quality.
High-speed angular cutting between 1-45º angle on tubes and profiles.
MAXPHOTONICS Laser Resonator
The equipment is equipped with an industry-leading Maxphotonics laser resonator, which allows dynamic power control from 10% to the maximum level, without compromising laser beam quality, ensuring stable and accurate performance in low and high power applications.
Tubest software
3D nesting software for laser tube cutting that optimizes material, automates processes and improves accuracy, with design, editing, reporting functions and a customizable interface, ideal for companies seeking efficiency and high performance.
High security
Thanks to their top-brand components, they meet the highest CE safety standards while also offering precision, reliability, and simplified maintenance.
| MODEL | SUNOR 3 | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Resonator MAX | 6kW, 12 kW, 20 kW | |||||||||||||||||||||||
| Chuck diameter: 20–240 mm | 20–280 mm | 20–350 mm | 20–450 mm | 20–500 mm | 20–550 mm | |||||||||||||||||||
| Maximum weight of the profile on plates: 300 kg | 500 kg | 1,100 kg (optional 1,500 kg) | 1,100 kg | 1,500 kg (optional 2,500 kg) | ||||||||||||||||||||
| Maximum square tube size: 220 × 220 mm | 280 × 280 mm | 350 × 350 mm | 320 × 320 mm | 360 × 360 mm | 550 × 550 mm | |||||||||||||||||||
| Maximum tube length (load): Depending on the model, from 6,000 to 20,000 mm | ||||||||||||||||||||||||
| Number of chucks: 3<br />Maximum tube length (discharge): Depending on the model, from 6,000 to 20,000 mm | ||||||||||||||||||||||||
| Maximum weight of the semi-automatic loader: 1,100 kg | 1,100 kg | 1,500 kg (standard) Optional reinforced version: 3,000 kg | 1,800 kg (standard) Optional reinforced version: 3,000 kg | 5,500 kg (standard) Reinforced option: 10,000 kg<br />Number of profiles in the loader: 6+1 | 6+1 | 4+1 | 3+1 | 3 (optional: 4)<br />Loading type: Manual (standard). Optional: semi-automatic | ||||||||||||||||
| Discharge type | Stacker (Standard). Optional: Semi-automatic | |||||||||||||||||||||||
| Minimum scrap | Zero<br />Drive chuck speed | 220 mm – 80 m/min | 350 mm – 70 m/min | 500 mm – 50 m/min | 50 m/min<br />Drive chuck acceleration | 0.8 G | 0.5 G | 0.5 G<br />Positioning accuracy | ± 0.05 mm<br />Cutting accuracy | ± 0.05 mm<br />Servo motors | Yaskawa<br />Rack and pinion | YYC<br />Linear guides | Hiwin<br />Electrical components | Schneider<br />Safety light curtains | Leuze SIL3 CAT IV<br />Safety fencing | Finger-type<br />Vision cameras | In the infeed, cutting and outfeed zones | |||||||
| Tube type | Round, rectangular, square, elliptical, C, U, L | |||||||||||||||||||||||
| MATERIAL | SUNOR 3 | ||
|---|---|---|---|
| Power | 6 kW | 12 kW | 20 kW |
| Carbon steel | 14 | 25 | 25 |
| Stainless steel | 10 | 20 | 25 |
| Aluminum | 12 | 16 | 20 |
| Copper | 5 | 8 | 20 |
| Bronze | 10 | 12 | 20 |