TITAN Series
The TITAN series is designed for high-demand industrial applications where strength and stability are essential.
Nitrided treatment, manufactured in steel with a nitriding and hardening process, making them highly resistant to scratches and wear.
Reinforced structure, with lower ribs ensuring stability even under heavy loads.
3D modular design, with reinforced legs for demanding work, featuring nylon castors with brakes.
Millimetre scale and angle gauge on all four sides of the table, laser-engraved with angle markings.
Characteristics
01. Center-to-center distance
TITAN Series welding tables are designed with a precisely engineered hole pattern, optimized to ensure maximum versatility and repeatability in fixturing applications. The center-to-center hole spacing varies according to the hole diameter: 50 mm for Ø16 mm holes, 75 mm for Ø22 mm holes, and 100 mm for Ø28 mm holes. This configuration allows the table to accommodate different tooling requirements while ensuring compatibility with a wide range of clamping and positioning accessories.
02. Table thickness
The plate thickness is matched to the hole system to ensure an optimal balance between strength, rigidity, and table handling. In the Ø16 mm configuration, the thickness is 13 mm; in Ø22 mm, it is 18 mm; and in Ø28 mm, it is 25 mm. This design enables a robust structure capable of supporting heavy loads without deformation, while ensuring precise fixturing accuracy and stability in demanding welding applications.
03. Reinforced structure
The heavy-duty structural ribs of the TITAN welding tables are a key component of the load-bearing design, increasing structural rigidity, dimensional stability, and positioning accuracy during operation Thanks to the reinforced substructure configuration of the tabletop, the TITAN welding tables maintain excellent dimensional stability and high flatness consistency across the working surface. This design helps minimize the risk of localized deformation, even under heavy loads or the thermal stresses typical of welding processes.
04. millimetre scale and an angle gauge
The table features a millimetre scale and an angle gauge, both laser-engraved on all four sides, making it easy to measure lengths and angles accurately directly on the work surface. These permanent markings ensure quick and accurate readings during welding, assembly and the positioning of parts.
Leg setups
Legs with wheels and side support
Square legs
Round legs with nylon wheels, 3 heights (600–800 mm)
| MODEL | TITAN Series | |
|---|---|---|
| Clamping hole diameter | Ø16 | Ø22 |
| Machining spacing | 50 ± 0.5 mm | 75 ± 0.5 mm |
| Table thickness | 13 mm | 18 mm |
| Table dimensions (LxWxH) |
1500 x 1000 x 100 mm 1500 x 1500 x 100 mm 2000 x 1000 x 100 mm 2000 x 2000 x 100 mm 2400 x 1200 x 100 mm 3000 x 1500 x 100 mm |
1500 x 1000 x 150 mm 1500 x 1500 x 150 mm 2000 x 1000 x 150 mm 2000 x 2000 x 150 mm 2400 x 1200 x 150 mm 3000 x 1500 x 150 mm |